How to Fix Low Water Pressure at Home in Pennant

Spread the love

We’ve all had that ideal hot shower that you never want to finish. great water pressure, great temperature, and no nagging. Few things are more annoying than when your shower head doesn’t have enough pressure to remove conditioner from your hair.

Low water pressure in the home seems insignificant until it happens. Refilling toilets takes time, cleaning your toothbrush in a trickle is almost impossible, and filling a jug or watering your yard is challenging.

But what causes low water pressure and how can you determine whether it’s a temporary issue or a serious one? This article will explain low water pressure and how to fix it.

What Does Low Water Pressure Mean?

Water pressure in your house is measured in PSI. The optimal home pressure is 60–70 PSI, although 30–80 is normal.

When you turn on the faucet and don’t receive adequate pressure, it signifies either you don’t have enough water entering into your pipes, a blockage, or a leak. Fixing the issue starts with identifying which one pertains to you and what’s causing it.

Request Water Filtration Systems

What are common causes of low water pressure in a house and how to fix them?

Start with low-hanging fruit to diagnose water pressure concerns. Before digging up your yard plumbing system, contact your water provider and make sure the main cutoff valve is open.

With that in mind, we listed probable reasons and remedies for water pressure issues in order of importance.

Has Your Filtration System Been Maintained?

Check your filtration system for filter replacement. Your previous filter may not pass as much water. As instructed, change them often.

Does Your Home Have Other Water Running?

A toilet or hose left running outside? Every faucet in most households shares the same water supply, so if your hose is leaking, you won’t receive the same pressure elsewhere.

Problem with your hot water heater?

Compare hot and cold water for similarities. Your hot water heater is likely to cause poor hot water pressure but normal cold.

Your water heater may be rusted or unable to keep up with consumption. A water softener may prevent your pipes and appliances from corrosion.

Are Pipe Air Traps Lowering Water Pressure?

Air trapped in pipes may create several issues. When pipes and walls knock, this may be the cause. Flush your system if you suspect air in your pipes.

Start on the lowest level of a multi-story property by turning on the hot and cold water slightly in each faucet. Keep them on and repeat on the following level. Continue until all house faucets are flowing. Let them run for two minutes, then turn them off from the top down.

After 15 minutes, check the water pressure again.

Was it fixed? Move on if not.

Do Dirty or Corroded Plumbing Fixtures Cause Water Pressure Issues?

Whether it’s not the air in your pipes or hot water heater, you’ll want to know whether the pressure reduction is widespread or limited to one faucet or appliance.

Sediment accumulation or corrosion in your kitchen faucet may be the cause. Checking the aerator, the little screen that aerates faucet water, is the quickest way to fix this. Many microscopic holes may be filled by mineral deposits, dirt, or rust. This is particularly true with hard water.

Removing and cleaning the aerator may be a fast DIY fix. You should realise that if your aerator is rusty and clogged, the fixture may be too. Fortunately, most fixtures are inexpensive and straightforward to repair. Changing the aerator is your next best option if cleaning doesn’t work.

Use the water shutdown valve before removing it.

Are Your Water Shutoff Valves Fully Open?

Your pressure issue may be up the chain if it’s many locations. Check off the simple ones first.

As a homeowner, you undoubtedly have a cutoff valve between the municipal water main and your pipes and a water metre with another shutdown.

These may partly shut off your water supply, resulting in frustratingly low water pressure in the residence. Since the water main shutdown valve is easiest to reach, check it first. It might be in your yard or residence. Upon finding it, completely activate it.

If your water main shutdown valve is fine, check the water metre valve. These are usually not a concern since they’re underground and hard to reach. Unless you just had homework done, it’s not your water metre valve unless it’s easy to reach.

You should proceed if everything checks out but you still have an issue.

Does Your Water Pressure Regulator Lie?

Your home’s plumbing receives pressure from the main water supply line via the pressure regulator. It keeps your plumbing secure, but it might malfunction and lower your water pressure.

If your home doesn’t have a water pressure regulator, skip this step. If you have one, check your hose spigot water pressure using a gauge. Your regulator may be the issue if your pressure gauge and regulator don’t match.

Fortunately, if you’re handy, you can replace it yourself. Good plumbing services should be easy otherwise.

Does Your Neighbour Have Water Pressure Issues?

After checking the obvious objects in your house, ask around to discover if your water flow is weak.

Knock some doors or text your neighbours. Ask if they have water pressure concerns. If so, you may need to wait out a water main or supply issue.

Is Your Water Company Aware?

Whether your neighbours are experiencing a problem or not, phone your water provider to see if there is a problem. whether you’ve spoken to your neighbours, you may tell them whether numerous households are experiencing the issue or just you. Be careful to follow their advice.

Your major goal is to determine whether there’s a local problem that will resolve shortly or if you need a licensed plumber. Another reason to contact the water provider. If they have water pressure issues, your tap water may be affected.

A boil water alert is issued when your water source deems it unsafe to consume or cook with. Boil water notices are often issued when the main water line pressure lowers. Pressure within the main generally prevents pollutants from entering the supply line. If the water main pressure lowers, your water quality may decline and a boil water order may be issued.

Many water providers use media and word of mouth to notify the public about boil water alerts, so you may miss it. Calling the water company can reassure you that your home’s plumbing water is safe to drink.

If you’re still stumped, you may have more significant plumbing difficulties.

Ready for a Licenced Plumber?

If none of the above worked, contact a licensed plumber in Pennant Hills to check for pipe obstructions or leaks.

Water pipes don’t endure forever, particularly older steel pipes that corrode and reduce water flow. A qualified plumber can examine pipes for corrosion without digging them up.

If not an obstruction, there may be a leak. This might be worse if the water damages your house or foundation. You should fix a plumbing leak as a way to avoid damage to your house. If your water pressure is affected by a leak, it’s likely not in its early stages and should be taken carefully.


Spread the love
Exit mobile version